Flush leakage repair near me chattarpur-- Repairing a flush leakage can be a common household task. Here's a basic guide on how to do it: 1.Identify the Problem: If your toilet is leaking after flushing, the issue is likely with the flush valve or the flapper. 2.Turn Off the Water: Locate the water shut-off valve near the base of your toilet and turn it off. Flush the toilet to drain as much water as possible. 3. Inspect the Flapper: Lift the lid of the toilet tank and inspect the flapper. The flapper is a rubber piece that seals the flush valve. If it's worn, cracked, or misaligned, it could be causing the leak. 4. Replace the Flapper: If the flapper is damaged, you'll need to replace it. Flappers are inexpensive and can be found at most hardware stores. Follow the instructions that come with the new flapper to install it properly. 5. Check the Flush Valve: Inspect the flush valve to ensure there are no cracks or damage. If the flush valve is damaged, it will need to be replaced. 6. Tighten Connections: Check the connections between the tank and the bowl to make sure they're tight. Loose connections can also cause leaks. 7. Turn the Water Back On: Once you've made the necessary repairs, turn the water back on and flush the toilet to test for leaks. 8.Check for Leaks: After flushing, check around the base of the toilet and the tank to ensure there are no leaks. If you still notice leaks, double-check your repairs and make any necessary adjustments. If you're uncomfortable with any of these steps or if the problem persists after attempting to fix it, it might be best to call us we can help professional plumber to ensure the issue is properly resolved. Contact us: Delhi home solutions new delhi chattarpur mob. 8368335457, 9811451084, 01147029186 www.dhomes.co.in